Consideration for Selecting the Right Electrical Tape

Electrical tape is a safe tape for covering and insulating a wide range of cables, wires, and other materials that conduct electricity. Due to the insulation of these types of adhesives, they are widely used in work and home environments. Electric tape in different thicknesses and widths has different functions. These adhesives are available in different colors and coding for safety purposes. Reliable 3m scotch tape – Industrial Solutions usually has the following features.

Different Types Available

• Electrical tapes are usually made on the basis of a non-corrosive rubber and a back layer of polyvinyl chloride. Backing in adhesives is called electricity, which gives them the ability to stretch. The tension of the strips causes the electrical tape to conform to the cables during wiring.
• The type of adhesives is one of their most important features. Because the elasticity of adhesives depends on their type. The more elastic a material is, the more durable the tape will be.
• The adhesives are tested by exposure to environmental factors before being released. Environmental factors can include sunlight, cold temperature, humidity, etc. To choose the right kind of adhesives, check their physical properties. Performance, physical properties, back strength, and UL rating, among the criteria are the suitability of the material of the tapes.
• When choosing and buying electrical tape, be sure to pay attention to its material. For example, the fabric fibers used on the back of some adhesive tapes pose a potential fire hazard at high voltage. Of course, it should be noted that the adhesives are examined and inspected in order to obtain the highest standards, in terms of length and strength.

Electrical insulation is classified into four different types. Each of these types has different characteristics, depending on the adhesive material, such as rubber, mastic, vinyl, and lacquered cambric.

Rubber

Due to its high resistance to water, the rubber band is suitable for use in wet environments. This tape usually does not have an adhesive part and only sticks to itself. Typically, a rubber band is ideal for connecting to a 69 kV cable.

Mastic

The mastic strip consists of a part with a spongy center between the adhesive layer and the back. Mastic glue is a great solution for the need for versatility in projects.

Vinyl

Vinyl is usually the most common and widely used electrical tape for home use. This tape is acceptable for insulation, repair of cuts, and protection against moisture.

Lacquered Cambric

This electrical tape, with straight cuts, is created from cotton fabric. The fabric used in this tape is covered with oil and insulating protection against electricity. For information on types of electrical tape, visit www.industrialsolution.ae.